Clevo X7200 Service Manual download pdf (Page 33)

Disassembly

Removing and Installing the Video Card 2 - 9

2.Disassembly

Removing and Installing the Video Card

Video Card Removal Procedure

1. Turn off the computer, turn it over and remove the battery (page 2 - 5) and component cover (page 2 - 7).

Remove screws - (Figure 5a).

3. Disconnect the fan cables & and remove the fan units & (Figure 5b).

4. Remove screws - from the heat sink unit in the order indicated on the label (i.e screw 4 first through to

screw 1 last)

(Figure 5c).

Carefully (it may be hot) remove the heat sink units & by pulling the plastic strips & up (Figure

d).

Remove screws - from the video cards & (Figure 5d).



11 & 12.Fan Units

21 & 22.Heat Sink Units

29 & 30.Video Cards

•20 Screws



Caution

The heat sink, and video

card area in general,

contains parts which are

subject to high tempera-

tures. Allow the area

time to cool before re-

moving these parts.

Figure 5

Video Card

Removal Procedure

a. Remove the fan

screws.

b. Disconnect the fan ca-

bles & remove the fan

units.

c. Remove the screws in

the correct order.

d. Carefully remove the

heat sink units by pul-

ling the plastic strips

up. Remove the video

Screw 3



Heat Sink Screw Removal and

Insertion

Remove the screws from the heat sink in

the order indicated here:

4-3-2-1

When tightening the screws, make sure

that they are tightened in the order:

1-2-3-

1719

Screw 1

Screw 3

Screw 1

Screw 2

Screw 4 Screw 2

Screw 4

25 26 27 28

29 30

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 115 116

Comments to this Manuals

No comments

Clevo X7200 Service Manual Page 33

Comments to this Manuals

Related products and manuals for Laptops Clevo X7200